This is a Box to organize your Filament Samples. The Box includes 4x Magnets to hold the two parts together.

Designed for 25x Filament Samples (80 mm x 35 mm x 2,2 mm).
You will find the Filament Samples here:
[https://www.prusaprinters.org/prints/16322-filament-sample-with-box](https://www.prusaprinters.org/prints/16322-filament-sample-with-box)

Magnets:

• 4x Magnets
• Size: Ø10 mm x 2 mm
• Take a look for the right orientation of the Magnets, when you insert the Magnets in your 3D-Print.

I used PLA for the print:

• Prusament PLA Azure Blue
• Prusament PLA Jet Black

Notes:

• Color change at the first layer of the upper part. (MMU2S not necessary)
• The break to insert the Magnets is part of the sliced Modell
• Print Time:
  • Upper part: 3h13min. (with 0,3 mm layer height)
  • Bottom part: 3h45min. (with 0,3 mm layer height)
• Dimensions of the closed Box: 141 mm x 89 mm x 39 mm
• Dimensions of the Filament Samples: 80 mm x 35 mm x 2,2 mm