If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

[https://paypal.me/muddymaker](https://paypal.me/muddymaker)

You will need six M3x30mm socket head fasteners for the main box and lid, four 2x25mm stainless steel dowel pins for the over centre latches and stow-able handle.

There is a secret hidey hole for emergency cash etc.

The lid requires supports for the storable handle section.  

All the fasteners screw into the plastic. I used a ball end hex key to screw in the fasteners for easier installation. Do not over tighten the fasteners.

I used these dowel pins that can be found on Bambu Labs maker's supply section.

Internal dimensions are: L112mm W171mm H60mm.

External dimensions are: L121mm W180mm H78. 

I recommend the latches be printed with a CF filled polymer or ASA,ABS @100% infill for strength and durability. 

NB: All print files are in the correct print orientation.

Happy printing.