Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Small spring loaded catapult. Launch angle, launch pullback and spring load are all adjustable.
In addition to the printed parts you need
- 4x M3 28mm screws + nuts + some washers
- 1x M3 11mm screw + nut
- 1 or 2 pull springs ~ 5-10mm diameter, 20-50mm length Print Settings
Printer:
Prusa i3 MK2
Rafts:
No
**Supports:**
No
Resolution:
0.15mm
**Infill:**
~40%
Category: Engineering
29
Curtidas
79
Downloads
1
Impressões
Categoria
Engineering
Tags
catapult
thingiverse
catapault
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (6)
lock3.stl
2.1 MB
arm.stl
5.2 MB
end.stl
550.9 KB
end_nohole.stl
550.1 KB
side2.stl
2.5 MB
side1.stl
2.5 MB