Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This 3D-printed candy dispenser is shaped like a Gonk Droid from Star Wars and dispenses M&Ms when pressed. The original one powers machines; this one powers you—with sugar!
Assembly instructions
- join the “door” and “connector” pieces. The connector should point away from the flat side of the “door”, like in the picture below.
- insert the joined pieces into the “bottom” part with the flat side of the “door” upwards.
Slide the “floor” part into the “bottom” and hook the “connector” into it.
- insert the springs
- fasten the springs with two pieces of filament
- Insert the two “padding”s into the grooves
- Attach the legs to the bottom of the “floor”.
- Snap the “top” part onto the “bottom”, fill the droid with candy and snap the “lid” on.
30
Curtidas
187
Downloads
Categoria
Other House Equipment
Tags
starwars
robot
candy
dispenser
droid
candydispenser
gonk
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (18)
gonk-Lid.step
95.3 KB
gonk-Door.step
31.2 KB
gonk-Connector.step
20.8 KB
gonk-Leg_2pcs.step
33.1 KB
gonk-Bottom.step
166.1 KB
gonk-Floor.step
43.1 KB
gonk-Padding_2pcs.step
11.1 KB
gonk-Spring_2pcs.step
45.5 KB
gonk-Top.step
202.4 KB
gonk-Padding_2pcs.stl
3.4 KB
gonk-Connector.stl
6.7 KB
gonk-Bottom.stl
244.5 KB
gonk-Spring_2pcs.stl
205.6 KB
gonk-Lid.stl
293.6 KB
gonk-Floor.stl
82 KB
gonk-Door.stl
12.6 KB
gonk-Top.stl
768.3 KB
gonk-Leg_2pcs.stl
11.4 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta