A simple switch panel to control the power of the printer, LEDs and a raspberry pi. It was designed to be mounted on the right hand side of the prusa lack enclosure (can be mirrored in the slicer to fit on the left side aswell). Maybe this can be useful for someone :)

Switches that were used (no affiliate link):
[https://www.amazon.de/gp/product/B07QB22J62](https://www.amazon.de/gp/product/B07QB22J62)

Basic knowledge of electrical installation is required. I do not take any responsibility for damage on your hardware.

Print Settings

Print with the front on the build plate (see screenshot)

Brim: no

Supports: no

Resolution: 0.2

Infill: 15%

Material: doesnt matter, the one in the picture is made of PETG