This earring stand allows you to easily store up to 90 earrings. You can take out each insert separately - easy handling is guaranteed!

The base on the images was printed using following parameters:

Color: Prusament PLA Marble Grey

Layers: 0.4mm nozzle with 0.2mm layer height

Supports: no supports & raft needed

Infill: 15%

You might want to add a brim so the base does not lift during printing.

The inserts on the images was printed using following parameters:

Color: Prusament PETG Signal White

Layers: 0.4mm nozzle with 0.2mm layer height

Supports: no supports & raft needed

Infill: 15%

All parts were printed on a Prusa MK4. Happy printing! 

Feedback is always appreciated - leave a comment down below. Cheers!