This is a much improved model over my previous attempt.

The stand only requires support at the back where the cable pocket is (although you can try without support if you're feeling brave).

Material: PLA (uses about 65g at 20% infill)

Layer height: 0.2mm

Wall loops: 3

If you want a copy to edit, the original is in onshape: [https://cad.onshape.com/documents/ce53c39ea25ed2bf31a034da/w/8d37e59eab5e63081f6465b5/e/9db68cc8fa30140704a488a2](https://cad.onshape.com/documents/ce53c39ea25ed2bf31a034da/w/8d37e59eab5e63081f6465b5/e/9db68cc8fa30140704a488a2)