Summary

UPDATE1-Rival Mounts
DESCRIPTION
New Optional mounting parts added to suit the Nerf Rival rail, parts simply replace the picatinny rail versions.
Thanks to ehdrien for the suggestion, he also has shared rail adapters to mount picatinny attachments onto Rival rails.

NEW PARTS (STL)
QPS-PISTOL_MNTLWR(RIVAL)_V1-0.stl
QPS-PISTOL_MNTSIDE(RIVAL)_V1-0.stl

QPS-Pistol Version for 3D printed Nerf blasters

DESCRIPTION
The QPS-Pistol Sight is an open sight designed to look a bit like a typical Red dot sight for 3D printed Nerf blaster Pistols and smaller 3D printed Nerf blasters.
It is setup for Nerf blasters which have a larger amount of dart drop over distance.
Useful both for teaching basic sight adjustment & also for Nerf battles.
Attachment is for Picatinny rail.

DESIGN NOTES
This is a smaller more compact version of my original QPS design.
Original QPS design is availabel here:- [https://www.thingiverse.com/thing:4705126](https://www.thingiverse.com/thing:4705126)
The sideways movement works differently on this version with the front sight adjusting & the rear remaining fixed.

3D PRINTING NOTES
Generally print out using typical PLA 0.2mm layer height, 20% infill settings, No supports.
The Front sight does require supports for the M3 nut recess, however.
The Body of the sight is best printed at angle on the front face (No Supports are then needed), this does benefit from a finer layer height of say 0.15mm.

ASSEMBLY NOTES
See Photo build guide pdf.

Tim.

PARTS REQUIRED
M2x5 Csk (Motor Screws) (4x)
M3 Plain Nuts (4x)
M3x8 Socket Hd Bolt (1x)
M3x10 Socket Hd Bolt (1x)
M3x16 Socket Hd Bolt (1x)
M3x30 Socket Hd Bolt (2x)

PARTS INCLUDED (STL)
QPS-PISTOL_TOP_V1-0.stl
QPS-PISTOL_REAR SIGHT_V1-0.stl
QPS-PISTOL_FRONT SIGHT_V1-0.stl
QPS-PISTOL_MNTTOP_V1-0.stl
QPS-PISTOL_MNTLWR_V1-0.stl
QPS-PISTOL_MNTSIDE_V1-0.stl
QPS-PISTOL_YADJ-SMALL_V1-0.stl
QPS-PISTOL_ZADJ_V1-0.stl
QPS_ZPLATE_V1-1.stl