Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a sturdy, but relatively lightweight box to store small parts e.g. screws. It has ten compartments in the standard configuration.
Print with normal supports enabled and adjust the infill. I recommend 25% rectilinear, because it works nicely in tighter areas. This was printed with PETG, but other filaments should work just fine.
Note: The assembly can require some force.
9
Curtidas
76
Downloads
Categoria
Organizers
Tags
box
Licença
Creative Commons — Public Domain
Arquivos (8)
Body.stl
238.8 KB
QuadCompartment.stl
48.7 KB
Cap.stl
74.5 KB
SeperatorShort.stl
1.4 KB
Hatch.stl
110.5 KB
SeperatorLong.stl
2.2 KB
KBox Full.stl
500 KB
KBox v6.f3d
1.5 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta