Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Let’s make … a 3D printed clock with a twist! Watch as every 12 hours, Sisyphus pushes a boulder up a hill, only to fall back down and have to do it again. Perfect for your office space.
Everything is printed in PLA with a .4 mm nozzle, .2 mm layer height, and 30% infill. A few items will need supports, and the spacers could benefit from a brim. The face, bob front, mountain, hands, and Sisyphus need a filament change near the end of the print to add more colors.
A video about this project, including tips on building, is available at
All the files for printing can be found on printables at [https://www.printables.com/model/1127044](https://www.printables.com/model/1127044)
In addition to filament, you’ll need:
5/16” steel
3mm brass rod
3 small wood screws around 9 mm in length
10 M5 bolts at around 12 mm in length
10 M5 knurled inserts
At least 5 M4 bolts at around 12 mm in length
At least 5 M4 knurled inserts
A 50 mm M4 threaded rod
3mm shaft collars - [https://www.amazon.com/gp/product/B0CQ2Q5R4G](https://www.amazon.com/gp/product/B0CQ2Q5R4G)
13 3mm bushings with a 5mm outside diameter - [https://www.amazon.com/gp/product/B0CW31938R/?th=1](https://www.amazon.com/gp/product/B0CW31938R/?th=1)
608 skateboard bearings with 8 mm diameter
R2ZZ ⅛” ball bearings
springs that have an outside diameter of less than 6 mm and an inside diameter more than 3 mm
ball bearings at 2.5 mm
A bunch of BBs for weight
monofilament fishing line
3MM or smaller cord to hold the weights
Steve Peterson’s YouTube Channel - [https://www.youtube.com/channel/UCWbKinQBavrH3iPMvgzVQzg/featured](https://www.youtube.com/channel/UCWbKinQBavrH3iPMvgzVQzg/featured)
Steve Peterson’s clock on Thingiverse - [https://www.thingiverse.com/thing:3524448](https://www.thingiverse.com/thing:3524448)
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta