Simple blocks which can be stacked easily. The plan is to always stack a matching number over two previous numbers. e.g. (2) + (4) = (6).

The blocks with numbers from 0 to 20 are included. The blocks have a loose fit, to be easily disassembled again.

Tip: print numbers 0 to 6 multiple times.

Parts

• stackable numbers 0-20
• dragon with 4 block space

Printsettings - number blocks

• print on back side
• color change after 15 mm
• layer height: 0.2 mm

Printsettings - dragon

• default 0.2 mm layer height