Read carefully before downloading the model!!!

Flower clock face 20 cm, 1 mm thick (two variants, two colours / three colours)

This clock face can be used for a real clock. Just add a clock movement and hands, which you can buy online or at a watch store. Another option is to use it as a school clock for children.

Some types of movements need a spacer ring and some do not. That's why I added a spacer ring model, which you can stick to the center of the model so that it does not rotate. I also added the last version of the clock face, with an integrated spacer ring. I have both types of clock movements at home, so I will use spacer rings for some of the clock and not for others. Look at your movement very carefully, or measure its shaft, before you decide which model to print!!!

Don't forget to secure the position of the clock movement to the dial using hot glue or another reliable means so that it doesn't rotate during handling.

If you don't want to distort your print, wait for it to cool down.

There must be enough contrast between the background and the numbers to make the numbers easy to read. Therefore, use contrasting colours. No multicolor attachment type MMU3 is required for changing colors.

If you come across a clock movement with a different movement shaft size, you can simply enlarge or reduce the clock as needed or simply adjust the size of the hole in the slicer.

• Hodinový strojek tichý KOV 5/12 mm 6168S Skladem v ČR | Eshophodinek.cz

Hodinový strojek s tichým chodem včetně ručiček HRP60 | Hodinářství.cz

Hodinový strojek | STOKLASA textilní galanterie a látky

You can find the hour hands with explanations here: 

Clock hands for 15 cm clock face (dial) od autora Nina Máčová | Stáhněte si zdarma STL model | Printables.com