Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 196.21x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Geeetech Dark Grey Transmission Distance: 3.5
PLA Geeetech Matte Grey Transmission Distance: 3.5
PLA Geeetech Matte Light Grey Transmission Distance: 8.8
PLA Geeetech Matte White Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Grey
At layer #10 (0.88mm) swap to Matte Grey
At layer #15 (1.28mm) swap to Matte Light Grey
At layer #20 (1.68mm) swap to Matte White for the rest.