Project: swiateczny szkielet.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 59.55x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Grey/Grey
At layer #15 (1.28mm) swap to Grey/Lite Grey
At layer #20 (1.68mm) swap to White for the rest.