This is a stand for my Extra Large Funnel.  One of my followers suggested that I design something to hold the funnel while filling mylar bags (thanks shanekarl).  We generally use mason jars for the things we freeze dry, but have also used the mylar bags and found them to be a bit awkward.  This stand will hold the funnel so that it can easily be filled by one person.

The funnel itself barely fit on my Prusa i3 mk3.  This stand is slightly larger but still fits if you print it without a skirt.  The dimensions of my print bed are 250 x 210.  This stand uses all of it.  If you printed the funnel without resizing it, you shouldn't have any trouble printing this stand.  If you had to shrink the size of the funnel to get it to fit your print bed, you will also have to resize this stand by about the same amount to make it fit the funnel.

The 4 corners have 11mm holes sized for 3/8 inch wooden dowels, but you can use smaller ones.  There are holes in the sides of the dowel rings that are printed with 1/4-20 threads for the thumb screws.  They should work right off the print bed.  If you changed the size of the funnel, the threads might not work.