The head and face parts are the same for both body sizes. On single color printers, use layer-based material changes to color the legs and face.

Special Instructions:

"Face - hollow ear.stl" requires the ear piece to be inserted during the print (it will be impossible to insert afterwards). Make sure you have the ear piece printed beforehand, and the top surface sanded flat. When the print pauses, place the ear piece into the open space on the head, and then continue the print. A Prusaslicer file is provided.

Changes:

4/5/2024:

• Modified ear geometry to lock into the head when placed during the print. This will prevent the cooling fan from blowing it away.
• In the Face Hollow Ear Sliced file, changed the print pause to a material change. This way, the printer purges some filament before continuing to compensate for ooze.
• In the multimaterial face, extended the color part to the first 2 layers, instead of 1.