Santa!!

I've included pictures to help with assembly.

I printed this with my MK4 with MMU3.

Supplies/Tools needed:

• LED lights - Link
• Foil tape - Link
• Scissors
• Exacto knife - Any knife will work.

Assembly instructions:

1. Print the back.  There is a negative volume in the 3mf that will be used to pass the LED lights through.
2. Cover the inside of the back with foil tape.  Use the exacto knife to cut a clean edge in the corners.
3. Feed the LED lights through the hole and attach to the sides of the back.  Cut off any excess LEDs or use them all that is your choice.
4. Print the front.

I use these settings to obtain a clean first layer with no gaps.

• First Layer extrusion width - .6mm
• Overlap - Infill/Perimeters overlap 70%
• Slicing - Elephant foot compensation 0mm

Attach the front to the back and enjoy!