Simple gadget to protect table corners at home.

Designed for tables with 19mm thick top.

My print settings:

- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: satin
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: Fiberlogy FiberFlex 40D
- supports: not needed
- brim: yes, 5mm (turned off Elephant foot compensation and Brim separtion gap)
- perimeters: 3
- solid layers (top/bottom): 5/4

Feel free to support me on Ko-Fi [https://ko-fi.com/kutilman](https://ko-fi.com/kutilman) 
I can also sell my source files if you want to save some time designing variation.

Contact me here or via email on [https://juraj.mriso.com](https://juraj.mriso.com)