Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Simple Modular Storage System por Penguin_Guy_01 no Printables

Descrição

Hey there, I hope you enjoy this little storage system I have created. I realize it’s definitely missing some things and I plan to add them in in the future, but if there is something you want to see, just put it in the comments and i’ll do my best to add it asap.

Each “unit” is 5 cm, so 1x1, is 5cm x 5cm, but there is a 0.1 cm in between, so 2x1 is 10.1 cm x 5cm. You will need 1 connector per unit per side you plan to connect to another piece. It’s a little confusing, but I have a bit of an example in photos. Height is essentially Hx + 1 = y cm tall.

I hope you enjoy, I also hope it works, I’m low on filament and haven’t gotten to test a lot of it yet.

Printables

Simple Modular Storage System

Penguin_Guy_01 Penguin_Guy_01 (abre em nova aba)

Publicado em 20 de nov de 2024

1
Curtidas
17
Downloads
Categoria Organizers
Tags
organizer modular storage organization system simple basic
Licença Creative Commons — Attribution
Arquivos (49)
1x1 H1 Container.stl 56.1 KB
1x1 H2 container.stl 56.1 KB
1x1 H3 Container.stl 56.1 KB
1x1 H4 Container.stl 56.1 KB
1x1 H5 Container.stl 56.1 KB
1x1 H6 Container.stl 56.1 KB
1x1 Lid.stl 1.3 MB
2x1 H1 Container.stl 58.5 KB
2x1 H2 Container.stl 58.5 KB
2x1 H3 Container.stl 58.5 KB
2x1 H4 Container.stl 58.5 KB
2x1 H5 Container.stl 58.5 KB
2x1 H6 Container.stl 58.5 KB
2x1 Lid.stl 1.3 MB
3x1 H1 Container.stl 60.8 KB
3x1 H2 Container.stl 60.8 KB
3x1 H3 Container.stl 60.8 KB
3x1 H4 Container.stl 60.8 KB
3x1 H5 Container.stl 60.8 KB
3x1 H6 Container.stl 60.8 KB
3x1 Lid.stl 1.3 MB
4x1 H1 container.stl 63.2 KB
4x1 H2 Container.stl 63.2 KB
4x1 H3 Container.stl 63.2 KB
4x1 H4 Container.stl 63.2 KB
4x1 H5 container.stl 63.2 KB
4x1 H6 Container.stl 63.2 KB
4x1 Lid.stl 1.3 MB
L-bend H1 Container.stl 86.6 KB
L-bend H2 Container.stl 86.6 KB
L-bend H3 Container.stl 86.6 KB
L-bend H4 Container.stl 86.6 KB
L-bend H5 Container.stl 86.6 KB
L-bend H6 Container.stl 86.6 KB
L-bend Lid.stl 1.7 MB
2x2 H1 Container.stl 60.8 KB
2X2 H2 Container.stl 60.8 KB
2x2 H3 Container.stl 60.8 KB
2x2 H4 Container.stl 60.8 KB
2x2 H5 Container.stl 60.8 KB
2x2 H6 Container.stl 60.8 KB
2x2 Lid.stl 1.3 MB
Horizontal holder H1 insert.stl 3.7 MB
Concave H1 insert.stl 457 KB
SD Card H1 insert.stl 31.5 KB
PenPencil H4 insert.stl 124.9 KB
PenPencil H5 insert.stl 124.9 KB
PenPencil H6 insert.stl 124.9 KB
Connector.stl 1.4 KB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora