Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este

Modelo 3D Torch light por Michal Fanta en Printables

Descripción

Support me & Join Printables Club

The lamp consists of several parts.

The printed parts are Flame, Stick, Holder, and Nut. Flame and Stick consist of several parts that need to be glued together. For the pixelization effect, it is necessary to print the individual parts from different shades of the filament (pauses for changing the filament are already included in G-CODEs).

Flame and Stick is connected with 8 pieces cylinder shape neodymium magnets (5mm diameter and 3mm height). Magnets have to be glued into holes.

The holder can be attached to the wall with either two screws or double-sided adhesive tape.

A one-piece version of the Flame and Stick parts is also included.

The LED bulb is inserted in the IKEA STRÅLA Cord set.

Printables

Torch light

Michal Fanta

Publicado el 9 de ago. de 2023

793

Me gusta

1,131

Descargas

Impresiones

Categoría Bedroom

Etiquetas

ikea light lamp minecraft ledlight torch ikealamp torchlight

Licencia Creative Commons — Attribution — Noncommercial

Archivos (18)

torch-stick-rear-left.stl 6.8 KB

torch-stick-rear-right.stl 6.8 KB

torch-flame-quarter.stl 204.5 KB

torch-stick-front-left.stl 50.1 KB

torch-stick-front-right.stl 50.2 KB

torch-stick-main.stl 295.2 KB

torch-holder.stl 542.6 KB

torch-flame-in-one-piece.stl 813.3 KB

torch-stick-in-one-piece.stl 397 KB

torch-nut.stl 3.1 MB

torch-stick-main.3mf 81.9 KB

torch-stick-rear-left-and-right.3mf 35.8 KB

torch-stick-front-left-and-right.3mf 57.4 KB

torch-nut.3mf 911.9 KB

torch-flame-in-one-piece.3mf 232.3 KB

torch-stick-in-one-piece.3mf 108.7 KB

torch-flame-quarter.3mf 83.5 KB

torch-holder.3mf 185 KB

Ver en Printables

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta

Comparar ahora