Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a chunky tablet boom arm that I created to keep my tablet out of the way while at my workbench.
It's important to reinforce this print with more infill around the joints where the arm parts meet. The tolerances on the screws are a bit tight but functional. This model takes a few 10mm hex head bolts and nuts for the joints. The arm is fairly stiff but can't support itself with a tablet at its extreme extents.
171
Curtidas
620
Downloads
1
Impressões
Categoria
Tools
Tags
tablet
tabletstand
tabletholder
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (13)
Table_Clamp_Screw_Short.3mf
1 MB
Moving Jaw_Reduced.3mf
230.3 KB
Base2_Reduced.3mf
34.7 KB
Dovetail.3mf
1.6 KB
Stationary_Jaw.3mf
35.1 KB
Table_Clamp.3mf
97.2 KB
Table_Clamp_Screw_Long.3mf
963.4 KB
Knurled_Screw_Turn_3.0.3mf
103.4 KB
Arm.3mf
22.2 KB
Pivot Adapter.3mf
42.7 KB
Table_Clamp_Expanded.3mf
95.2 KB
Table_Clamp_Pivot.3mf
28.4 KB
Moving_Jaws_Screw.3mf
1 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta