I made this 19mm push button switch holder [https://it.aliexpress.com/item/4001291695467.html?spm=a2g0o.9042311.0.0.64284c4dnJ6NUq](https://it.aliexpress.com/item/4001291695467.html?spm=a2g0o.9042311.0.0.64284c4dnJ6NUq)

with the respective socket [https://it.aliexpress.com/item/4001023686738.html?spm=a2g0o.9042311.0.0.64284c4dnJ6NUq](https://it.aliexpress.com/item/4001023686738.html?spm=a2g0o.9042311.0.0.64284c4dnJ6NUq)

the cabinet must be drilled in the upper part with a 30mm cup drill

to be printed vertically with the part of the button resting on the bed.

It is recommended to add supports

infill: 20%

if you are interested in this object I suggest you print the cable box

[https://www.prusaprinters.org/it/prints/106582-cable-box-for-ikea-lack](https://www.prusaprinters.org/it/prints/106582-cable-box-for-ikea-lack)

Share your makes

💙Did you like the model? Support me with a donation here:

[https://ko-fi.com/randazzoprintfab](https://ko-fi.com/randazzoprintfab)