This model is a stand/mount for the Prusament Spool Clock that I built. The clock was inspired by the design from PointNemo at [https://www.printables.com/model/966173-prusament-spool-clock](https://www.printables.com/model/966173-prusament-spool-clock)  ; as a side note the clock printed beautifully. If your interested in a clock design I would recommend looking at PointNemo's design.

This is a model I made for a desktop mount for this clock design since I preferred a desktop option vs. a wall mount. For the clock mount hardware I installed an M4 threaded insert and used an M4 button head machine screw for the clock hanger.

Printer: Prusa Mini+; Nozzle: 0.4; 0.2 Structural with the Prusa Slicer Input Shaper; 1st layer speed @ 10mm/sec [just getting  that 1st layer down solid] then all other layers @ std. slicer settings

Material: PETG

Design created in Creo Elements Direct