Help Wanted

If you print any of these successfully, please leave a comment with the material and settings so that I can update the description accordingly.

Background

These parts were originally designed by ZEP a.k.a. Maxim (he has no presence on social media) and distributed over Telegram.

I reached out to him directly to ask for permission to redistribute this material for free on Thingiverse and printables.com and I got the OK.

He also said that it was ok for people to use these designs commercially.

Printing Instructions

All I got from him is:
> TPU

I have printed the suspension side covers in PETG and it worked just fine.

Mirroring

The front handle, rear handle, bottom front bumper, kickstand, suspension top cover, jump pad base, jump pad mount and jump pad footlock need mirroring to get both sides.
Some are the left side. Some are the right side. It's a bit of a mess. Good luck.

Extended versions

The front handle, the rear handle and the kickstand have an extended version. Note that you don't need to print the normal and the extended version.

If you think that having the mirrored versions is a good idea, let me know in the comments and I'll see what I can do.

Jump pad

You will probably want to print the base and the mount in something harder like PETG or PLA but the footlock is probably best to print in TPU, although I have printed some in PETG and it works just fine.