I loved the original model for its simplicity and effectiveness for holding and mounting the Micro Jig GRR-Ripper.  But, I also love my Wall Control panels for tool storage.  So, I remixed this to work with the DDD Wall Control system.  

I recommend printing the main body on its side as you can see in the slicer screenshot. Printed on its side, you will need to use supports.  I printed in PolyMaker PETG and used Bambu PLA for the support interface with a 0 top Z distance and a 0 Top Interface Spacing to get the cleanest print.

You can print the main body on its back but it won't be as stong and could snap at the layer lines.  

I used a 0.4mm nozzle, 0.24mm layer height, 3 walls, and a 15% gyroid infill.