The bench consists of multiple modular parts, including support frames and seating slats, which are printed separately and easily put together.

Feedback is welcome to help refine the design!

Print Settings:

• Printer: Prusa MK4S
• Material: PLA
• Layer Height: 0.2 mm
• Infill: 20% for slats, 30-40% for frames
• No BRIM!

Assembly Instructions:

1. Print the individual parts using the settings above.
2. Assemble the slats into the frame, either by snapping them into place.

The sale, sharing, and modification of data is prohibited. If you wish to sell prints, please obtain a commercial license from here: [https://patreon.com/3DBende.](https://patreon.com/3DBende.)

A subscription gives you access to many designs for free, and the rights for commercial use of the products.