Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 154.79x154.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Basico Control3D Black Transmission Distance: 1.6
PLA Overture Chocolate Transmission Distance: 0.2
PLA PolyTerra Wood Brown Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Prusament Vanilla White Transmission Distance: 1.2
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Chocolate
At layer #15 (1.28mm) swap to Wood Brown
At layer #17 (1.44mm) swap to Beige
At layer #24 (2mm) swap to Vanilla White for the rest.