Mini Skeleton - Sculptember Model #8 — STL Grátis

A mini skeleton with a removable head!

[https://youtu.be/aflsFjceqUQ](https://youtu.be/aflsFjceqUQ)

Printing

Head prints separately
Can be printed in both FDM and resin
Supports ARE required on the body - especially below the pelvis and ribs. If printing body #1, supports are needed under the elbows
Minimal infill required

Assembly

The head prints as a separate part that can be left loose or glued on. If using glue, just a drop of hot glue is sufficient for a good hold that can be removed later.

All Sculptember Models

More Customization

Check out the STL Twister by Andrew Sink to put a custom twist on this model.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Sculptember Mini Skeleton" (https://3dprinty.xyz/project/132) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).