Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I've printed the first version I've uploaded but there was some mistakes and assembly was hard.
So I've made a few change and reuploaded all the files.
This should be good now.
All the ZZ part is for cutted part to fit small bed. Should be stronger than the previous one.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.2
Infill:
20%
Filament:
Don't care PLA
Category: Containers
8
Curtidas
17
Downloads
Categoria
Other House Equipment
Tags
beer
thingiverse
Licença
Creative Commons — Attribution
Arquivos (29)
large_display_Support_Bieres_Cote_100353.stl
391.3 KB
large_display_Support_Bieres_Support_100353.stl
482.3 KB
large_display_Support_Bieres_Fond_100353.stl
383.7 KB
large_display_Support_Bieres_Support_2_100353.stl
457.5 KB
large_display_Support_Bieres_Fond_1_100353.stl
395.8 KB
large_display_Support_Bieres_Poignee_2_100353.stl
413.1 KB
Support_Bieres_Separateur.stl
14.9 KB
Support_Bieres_Poignee.stl
31.6 KB
Support_Bieres_Decoupe_2.5_Support_ZZ_1.stl
47.5 KB
Support_Bieres_Decoupe_2.5_Poignee_ZZ.stl
20.6 KB
Support_Bieres_Decoupe_2.5_Fond_ZZ_1.stl
39.5 KB
Support_Bieres_Decoupe_Poignee2_ZZ.stl
19.4 KB
Support_Bieres_Fond.stl
54 KB
Support_Bieres_Decoupe_2.5_ZZ.f3d
5.7 MB
Support_Bieres_Support.stl
88.1 KB
Support_Bieres_Poignee_2.stl
15.9 KB
Support_Bieres_Fond_2.stl
30.9 KB
Support_Bieres_Decoupe_2.5_Support_ZZ_2.stl
51.2 KB
Support_Bieres_Decoupe_2.5_Poignee_ZZ2.stl
30.9 KB
Support_Bieres_Poignee_1.stl
11.4 KB
Support_Bieres_Cote.stl
15.3 KB
Support_Bieres_Decoupe_2.5_Fond_ZZ_2.stl
38.6 KB
Support_Bieres_Support_1.stl
48.3 KB
Support_Bieres_Poignee_3.stl
12.4 KB
Support_Bieres_Support_2.stl
51.5 KB
Support_Bieres_Poignee_4.stl
22.7 KB
Support_Bieres_Fond_1.stl
31.3 KB
Support_Bieres_v11.f3d
2 MB
Support_Bieres_Decoupe_Poignee1_ZZ.stl
29.8 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta