Hueforge for the Guyver.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 159.18x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 5.7
    PLA BambuLab Basic Gray Transmission Distance: 14
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (0.68mm) swap to Blue
    At layer #19 (0.92mm) swap to Gray
    At layer #30 (1.36mm) swap to White for the rest.