Want new knobs for your drawers? Why not try these cute daisy knobs!

They can be be printed without support using the provided profile!

I recommend using sandpaper on the backside of the petals and maybe also on the edge of the petals as the do feel a little sharp at first.

I also recomment using M4 metal screws. The depth of the hole is 14 mm, so measure the depth of your drawer wall and add about 10 mm to get the length of your screws. If you are replacing existing IKEA knobs, the chance that you can reuse these screws (M4) is pretty high!

If you do not have any M4 screws, you can print those on plate 2 (25 mm long)

These knobs were designed for my IKEA Hauga drawer.

Please note that the screws recommended below is only if you do not have M4 screws and you do not wish to print you own screws. The recommende number of packages (3) is if you need 12 screws for the Hauga drawer (5 pieces per package).