Dancer in smoke Hueforge

5 colours . 1 pause enabled to change fillament in Ams . I changed black to white .Have fun!

Project: Dancer with smoke.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 144.44x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA+ Esun Orange Transmission Distance: 5
    PLA+ Esun Bone White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Blue
    At layer #14 (1.2mm) swap to Orange
    At layer #18 (1.52mm) swap to Bone White
    At layer #21 (1.76mm) swap to Jade White for the rest.

Descrição