This is a simple adjustable wall mount. The design was made for an ASUS TUF Dash F15 laptop, so as long as yours is <10.5" from front to back, it should fit in this mount. I've included the step file so it can be adjusted if needed.

Things you'll need for this model:

1. (4) M5x20 Hex Head Cap Screws
2. (4) M5 Nuts
3. Mounting Screws (The hole diameter is 6mm and the inset is 10mm, so you'll need screws with a major diameter of <6mm and <10mm head diameter)

Printing/Assembly:

1. I printed this with 6 walls and 15% infill, but the stronger the better. It works with generic settings otherwise.
2. To assemble, lay out the pieces as shown in the images with the slotted arm on top and the straight arm on bottom. Install the cap screws into the arm joints. One side is designed specifically for the nut and one for the screw. The weight of the laptop will hold the arms in place, so once it's assembled, you're ready to mount.