This owl takes only 4 colors to print and it has nice depth and definition. I printed this twice, once with silver and again with ash gray. They both turned out great. Silver gives a bit of shine to the finished product.

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies is available on my Patreon:

[https://www.patreon.com/busykikibee](https://www.patreon.com/busykikibee)

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Pictured frame, stand or puzzle bottom can be found in Frames and Functional items over @CanadianGamer [https://makerworld.com/@CanadianGamer/collections/1027330](https://makerworld.com/@CanadianGamer/collections/1027330)

Project: Night Wing
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

This print uses 4 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Silver (or Ash Gray or Gray)
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At 0.72mm swap to Blue Gray
At 1.12mm swap to Silver
At 1.68mm swap to Ivory White for the rest.