🐣模型理念

这些测试模型可以帮助您快速了解某卷耗材的性能，以便玩家作出参数上的调整。

🐥打印说明

如果要测试除pla外的的耗材，请自行修改或者在APP选择好耗材后勾选“使用我的材料预设”

🐥相关释义

精度和冷却测试：25.00-20.00-15.00-10.00-5.00-2.50（该值越接近标准值越好）

倾斜角测试：45—70度优；30度差（该值越大越好）

拉丝测试：（有无拉丝或者拉丝多少）

尺寸精度测试：0.1—0.3mm优；0.4mm一般；0.6mm差（该值越小越好）

薄壁测试：表面光滑度（表面细节）

🌍翻译：

🐣 Design concept

These test models can help you quickly understand the performance of a certain roll of consumable, allowing players to make adjustments to parameters.

🐥Printing Instructions

If you want to test materials other than PLA, please modify it yourself or select the material in the app and check 'Use my material preset'.

🐥Relevant explanation

①Accuracy and cooling test: 25.00-20.00-15.00-10.00-5.00-2.50 (the closer this value is to the standard, the better)

②Tilt angle test: 45—70 degrees is good; 30 degrees is poor (the larger this value, the better)

③Wire drawing test: (presence of wire drawing or how much wire drawing)

④Dimensional accuracy test: 0.1—0.3mm is good; 0.4mm is average; 0.6mm is poor (the smaller this value, the better)

⑤Thin wall test: surface smoothness (surface details)