This is my first posting and am I very new to 3D printing, so I hope I have not made any glaring mistakes. Feedback is always appreciated. 
Although this is not a unique creation I created this modular desk organiser to meet my current needs, but also to allow changes and developments in the future. But maybe someone might find it useful as well. It is based upon the Gridfinity system and was designed using the Gridfinity generator at [[https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1](https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1)](https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1).
 

I have included in the file the following designs. And of course they can be printed in whatever multiples or combination that suits your needs.
- 1x1x4 bin (42x42x32mm)
- 1x2x6 bin (42x84x46mm)
- 1x2x12 bin (42x82x84mm)
- 2x2x12 bin (84x84x84mm)
- 1x6x12 bin (42x252x84mm)
- 1x1 lid - to fit the 1x1 bin, in case it might be useful
- 1x2 lid - to fir the 1x2 bin, in case it might be useful
 

The large 1x6x12 bin can neatly hold a note book, and I have thickened the walls to make it more robust. This does mean the print time is longer, but the advantage is that you are less likely to need to print a replacement due to damage through use.
 

I have also included a Gridfinity base to keep it all together. But if you need a different size then you can easily create your own bespoke size grid at [[https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1](https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1)](https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/1).
 

I have added magnet holes to the bottom of the individual bins/organisers. This makes them more stable and less likely to fall over.
 

One of the photos shows the organiser on top of the excellent Rugged Drawer System designed. By K2_Kevin - [[https://makerworld.com/en/models/810461#profileId-762995](https://makerworld.com/en/models/810461#profileId-762995)](https://makerworld.com/en/models/810461#profileId-762995)_. But of course these are not necessary as my design is intended to used as a standalone system.

Update: 19 Nov 2025

I had added two more models to the series following requests. a 1x3x12 box in various configurations; and a 2x2x12, 2x2x6 box to take note pads or sticky notes. These can be found lower down in the list of profiles.