Welcome to Fay3dLab 2025.. Happy new years everyone..

To kickstart 2025.. i have finally created a new suspended model franchise.. ever since i created the suspended raptor, i have been getting a lot of request from my followers to make the alien xenomorph suspended incubator..

So here it is.. i present to you the suspended alien xenomorph..

I made the incubator to look like the xenomorph itself..

For this project, i used several different colored filament sponsored by Chitu Systems Conjure Chameleon Silk PLA Filament purple black and black purple blue… unfortunately they only gave me sample filament.. so didnt have enough of each color to print the whole incubator.. i just used simple black and grey filament for the bottom base.. if you like to use the same Silk PLA filament, you can just search for it on Amazon.. since i dont have an affiliate links..

For the lights.. i used bambu lab RGB light puck.. since you can change the color of the lights.. you can also use the standard LED kit001 too.. only difference is the LED kit001 uses USB wires and the RBG puck uses batteries..

Assembly is straight forwards.. you'll need a bit of glue to hold all parts together.. The LED hole on the bottom base can fit both RBG puck and LED kit001.. but the puck will have slightly tighter tolerance when inserting the puck.. as for the LED kit001.. i have also provided the USB wire channel on the bottom of the base.