This is small travel box for pills.

Recomended settings for smooth thread: Layer hight 0.12mm, Infill 10%

There are 3 options for the lid:

• Separate cross which should be glued to the lid (PillBox_Lid.stl, PillBox_Cross.stl)
• Cross part in the lid, suitable for multicolor print (PillBox_Lid_Cross_multicolor.stl)
• Lid without cross (PillBox_Lid_without_Cross)

There are 2 options for the body:

• One compartmant (PillBox_Body.stl)
• Two compartments (PillBox_Body_Two_Compartments.stl)