Customizable Modular Lithophane USB Lamp

Here's the lithopane lamp I designed a few years ago: [https://www.printables.com/model/222459-lithophane-lamp](https://www.printables.com/model/222459-lithophane-lamp)

Because I wanted to be able to switch the lithopanes, I designed this new modular version of the lamp.

You'll need:

• 4/8/... (different) lithophanes

I've used the following site to create them: [http://3dp.rocks/lithophane/](http://3dp.rocks/lithophane/) Make sure to use pictures with a 1:1 ratio On the website select "outer curve" model Set your model settings to maximum size 100mm, thickness 3mm and border 3mm Also choose "positive image" in the image settings Set Curve to 85

• Mini USB LED with magnet (or similar)
• 1 zip tie, width 2.5mm (optional)

Use the lithopane_modular_extension.stl to add additional 4 lithopanes to your lamp!

I have not printed the extension yet, so please let me know if it works!

Let me also know if you have any suggestions (for designs of the top cover)!

Print Settings I used

Printer:

CTC

Rafts:

No

Supports:

No

Resolution:

0.15

Infill:

25%

Filament:

Ice Filaments PLA

Wintershine White