The tweezers automatically lock when you grab them, and the lock can be released by moving the protrusion.
Only the tip part requires support, but the rest can be printed without support.

How to assemble
Just stack the tweezers parts and fit the joining parts, even one joining part will work.

Note

This is a product easily made using 3D printing, so it is not suitable for precision operation. If you require precision operation, we recommend a commercially available metal product.

Please note that if you leave it closed for a long time, the spring will weaken.

The filament required for modeling is 12g. 

For 0.2mm Standard, the required time is approximately 40 minutes.

version without lock
[https://makerworld.com/ja/models/962188-designed-standard-tweezers#profileId-932301](https://makerworld.com/ja/models/962188-designed-standard-tweezers#profileId-932301)