Here's another Hueforge bookmark that I created. I hope you enjoy!

 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA Protopasta Moonstruck White Satin Transmission Distance: 10
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Gray
    At layer #14 (1.2mm) swap to Moonstruck White Satin
    At layer #17 (1.44mm) swap to Jade White for the rest.