I edited a downloaded file because after printing it did not mount in the correct way , was too wide and did not hold the grip on the Geeetech coil so I reduced the internal diameter by 0.2 mm and added for safety of teeth to 120° I also added pads with material type , now the adapter stays fixed and is no longer used I use Geeetech orange petg the file step is sized to be printed with a shrinkage of 0.2/0.3 mm I printed with my Longer Lk5 Pro layer 0.2 speed max 50 filling 5%teperature 1° layer 230 from 2° to fine 220 fan 1° layer 50 from 2 to end 100%
hello