Super Sonic Heuforge! This is my first upload and my first try at Heuforge. Couldn't find really any super sonic ones so I made this one! Please feel free to give me feedback on this model if you download it to print. I would like to learn to improve at making these so any tips and critiques are welcomed! Thanks and enjoy! 

Project: Super Sonic.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 122.18x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 4.5
    PLA BambuLab Basic Red Transmission Distance: 5.5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Red
    At layer #9 (0.8mm) swap to Yellow
    At layer #16 (1.36mm) swap to Jade White for the rest.