Glowforge button accessory to make it look like a nuclear detonation button. 

Assembly instructions:

1.  Print out all objects in any colors but recomended colors are gray for the base, white for the pole, and red for the button, and yellow for the button logo. 
2.  Place the pole on the top of the Glowforge button. place the base on it next. make sure that if you lift the pole, the base lifts too. 
3.  Place the button centered on the pole and glue it there. Do not get any glue on the base.
4. Wait for the glue to dry, then place base on the Glowforge button.