Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At Layer #9 Pause Change Black to White on AMS
    At layer #11 (0.96mm) swap to Mandarin Orange
    At layer #18 (1.52mm) swap to Lemon Yellow
    At layer #24 (2mm) swap to Black (Jade White) for the rest.