A bookmark depicting a waterfall with some Sakura tree in the foreground.

If you love a good landscape with a waterfall this is for you.

As usual the model comes with holes for strap and on the edges as negative parts. Feel free to remove some of them, or all, as you see fit.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 40.08x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA JAYO White Transmission Distance: 7.2
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to White
    At layer #18 (1.52mm) swap to Red for the rest.