This is the Square-223 puzzle cube. I've been working on it for a while and I am finally making it available.

Print everything in the loaded orientation the (#) indicates how many of that item is needed if more than 1, (S) indicates that object needs supports, (4walls) this object needs 4 walls 

Can be printed at .2mm layer height, 15% Gyroid infill. I recommend printing the Core with 4 walls to help strengthen the lip area and the screw holes (brass inserts did not work well with this design, so you need to screw directly into the plastic).

Disclaimer: This model requires very precise prints, make sure your machine is properly tuned.

Extra materials needed:

3x M3x16 Hex SSocket Screws

8x 5mmx2mm magnets (optional)

Tea Candle or any other wax (optional but recommended for lubricating the surface areas)

Your preferred glue for printed projects, I used regular super glue