Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Are you like me (weird) and like to display your CD's in a way that you can still see the cover instead of the side of the case? Well download and print this! Straight forward stand with progressively rising slots. Perfectly setup to hold your CD's securely and without risk of falling out. This includes those pesky digipak cases as well! You can shake this, bump it, knock it around and the CD's will not fall out. Holds 10 disk. It is 5x6x12 with a disk in the 10th slot. This will hold standard jewel case and both the thick digipak and thin digipak cases. Use the sleeve for a thin digipak. The thick ones can stand on their own. But the double disk packs will likely not fit(sorry they are just too thick and would require even jewel cases needing extra support).
Designed to be thin and easy to print with only a dab of glue needed. The pins that secure the two halves together can hold without glue, but not if you move it around. They are more meant for alignment. I suggest just a dab of glue, like the smallest amount in the hole, then put the pin in and press together for 15 seconds. Assembly complete! The digipak sleeve is slightly snug, so it has to go in just right.
New profiles added for A1 Mini with only 9 disk slots. Max that can fit on the mini.
New profiles added for P/X/H series. No change in design, only changes in speed to reduce print time on faster printers.
If you do print it, don't forget to share a picture! Love seeing how my prints turn out for others!
