Underware Cable/LED Channel Endcap

This is a simple press-fit endcap for Hands on Katie's Undware Cable Channel. It should work with Underware 2.0 as well, but I haven't tested it yet. When using your channel as an LED diffuser, this endcap will block undiffused light from bleeding out the end. It can also be used for aesthetics on normal cable channel as well.

For printing I used a 0.4mm nozzle with the 0.20mm Standard Profile, 3 wall loops, and 15% adaptive cubic infill. Scaling may be required for a snug fit depending on your printer. This should just friction fit, but you can use glue if desired. If you decide to use glue, I recommend only using it on the base so that the cover can still be removed.

I'll be adding more Multboard, Multiconnect, and Gridfinity compatible accessories for various tools, smart home devices, networking devices, and more in the future. Be sure to follow me to keep updated with my releases. Cheers!

Credits and thanks to:
Keep Making/Jonathan for MultiBoard

Hands on Katie for the Underware Ultimate Cable Management Solution

Descrição