Project: space bookmark v3

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 31.72x170mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

WARNING : if you want to resize it please resize only the x and y axes and not the Z axe !

Filaments Used: but you use all filament you have

    PLA Kingroon Black Transmission Distance: 0.4
    PLA Kingroon Red Transmission Distance: 4.2
    PLA Kingroon Orange Transmission Distance: 4.6
    PLA Kingroon White Transmission Distance: 4.7
This print uses 4 unique filaments

Swap Instructions:

    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Orange
    At layer #19 (1.6mm) swap to White for the rest.

To purchase a commercial license and sell my creations, access to my  KO-FI SPACE 

Alternatively, make a small donation    here ko-fi  [https://ko-fi.com/ziakat](https://ko-fi.com/ziakat)